THE CDA STANDARD.

1. Assessment

We evaluate your vehicle's paint condition and discuss your protection goals.

2. Preparation

Intensive decontamination, washing, and paint correction to ensure a flawless canvas.

3. Installation

Precision application of PPF, Ceramic Coating, or Tint in a climate-controlled bay.

4. Final QA

Rigorous quality assurance checks before the vehicle is handed back to you.

PAINT PROTECTION FILM

Installing PPF requires a surgically clean environment and immense patience. We don't just lay film; we wrap edges and customize patterns for a truly invisible installation.

• 1

  Decontamination Wash

  Removing all road grime, iron particles, and old waxes.

• 2

  Paint Correction

  Polishing out swirl marks so we don't seal in imperfections.

• 3

  Custom Pattern Plotting

  Using advanced software to cut precise templates for your exact make and model.

• 4

  Edge Wrapping

  Tucking edges behind panels wherever possible to ensure the film is virtually undetectable.

• 5

  Curing & Inspection

  Allowing the film to settle, followed by a meticulous edge-to-edge inspection.

CERAMIC COATINGS

A ceramic coating is only as good as the paint beneath it. Our obsessive prep process ensures the coating bonds perfectly to the clear coat for maximum durability and gloss.

• 1

  Multi-Stage Wash

  Strip wash to remove all existing sealants and surface contaminants.

• 2

  Clay Bar Treatment

  Pulling embedded contaminants out of the clear coat.

• 3

  Multi-Step Correction

  Leveling the clear coat to remove scratches and achieve a mirror finish.

• 4

  Panel Wipe Down

  Using a dedicated prep solvent to ensure zero oils remain on the paint.

• 5

  Application & Leveling

  Applying the coating in small sections and meticulously leveling it to prevent high spots.

• 6

  IR Curing

  Using infrared lamps to accelerate the curing process and harden the coating.

WINDOW TINTING

We use premium Profection Technology ceramic films. Our installation process guarantees a dust-free, bubble-free finish that looks like factory privacy glass.

• 1

  Glass Preparation

  Razor-blade cleaning and scrubbing to remove all interior glass debris.

• 2

  Heat Shrinking

  Molding the film to the exact curvature of the exterior glass before installation.

• 3

  Micro-Edge Trimming

  Shaving the top edges of roll-down windows for a seamless look without gaps.

• 4

  Wet Application

  Using slip solution to position the film perfectly on the interior.

• 5

  Squeegee & Inspection

  Pushing out all moisture and ensuring the film lays perfectly flat.